Annie Sloan Chalk Paint – Rocking Chair Makeover

This is my first time using Annie Sloan Chalk Paint on a piece of furniture larger than a little wooden stool and let me tell you, I love it. It is so easy to use, requires no prep work (seriously… no stripping, no sanding, no priming) and I love the way my chairs turned out!

I found these Cracker Barrel rocking chairs at a yard sale and paid $75 at a yard sale for both.

Continue Reading

They needed help. I wanted a pop of color for my front porch but didn’t want to lose that aged and weathered feel. So I went with a quart of Annie Sloan Chalk Paint in Provence.

Here’s a list of the rest of the supplies I used:

Annie Sloan Chalk Paint (Provence)
Clear Wax (to seal and protect)
Dark Wax (to age and distress)
Annie Sloan Wax brush (for applying dark wax)
Rags (for applying and wiping off wax)

Before I show you what I did, I want to share a couple of things:

1. Make sure you have plenty of clean rags handy.
2. Less is more when it comes to applying wax. Go light.
3. I went with a regular paint brush for painting, an Annie Sloan wax brush for the dark wax, and just rags for applying the clear wax. Just my preference. Some people will only use AS brushes. And that’s fine too. Go with the tools that work best for you.
4. There are a TON of AS Chalk Paint tutorials on YouTube.


Wipe down furniture to remove any lose dirt and cover anything you don’t want to paint. Stir or shake paint and apply with a paint brush. Chalk paint is thick and dries quickly. Here’s what the first coat looked like:

Once both chairs were covered, I waited about 3 hours before applying the second coat, but it was dry to the touch in 20 minutes.

Here’s what it looked like after 2 coats.

After applying the second coat, I let the chairs dry overnight. The next morning, I applied a thin coat of clear wax with a clean rag.

The clear wax is very soft and feels like Crisco. I put just a thin amount on a rag and really worked it into the chairs. It doesn’t take much at all. If you find yourself putting on too much wax, just wipe it off with a clean rag.

I let the wax dry overnight too. The next morning, I started the distressing/antiquing part using dark wax. Again, you don’t need much and you’ll want to do this in small sections.

I used the wax-on-wax-off method (you can find a video on youtube). It makes it so much easier to control the amount of dark wax that is left behind.

With the Annie Sloan wax brush, I applied dark wax to the chair. Then I took a rag with a small amount of clear wax on it, and used it to wipe off the dark wax until I got the level of distressing that I wanted.

I LOVED how the dark wax brought out the paint strokes and wood grain. Check out the difference between the chair that has the dark wax and the one that only has clear wax.

A few hours after I finished distressing the second chair, the wax was dry to the touch. (If it’s sticky to the touch, there’s too much wax. Just wipe off the excess with a clean rag.) Here’s what they look like now!

I love my chairs![/expand

Leave a Reply