A while back, long before blogging, my awesome friend Heather called me and asked if I wanted an old door that she had no use for. I knew nothing about the door but of course, said “YES!” Come to find out prior to that call, her husband Dan had been at the dump dropping stuff off when he came across a few old doors and took them home from the dump.
This is what the front of the door looked like when I got it. It was a bright peachy color. The backside was weathered, but just stained and varnished. I started this little makeover by scraping off all of the loose paint. This beauty had been painted several times so the wood looking color you see?…just another layer of paint.
After it was scraped I took a Mouse sander to the entire piece. I wore it through till I could see wood in some spots. Then I gathered my supplies.
Vaseline, Briwax, a couple of colors of miscellaneous paint, a paintbrush, and disposable gloves.
Step 1: Stain the exposed wood with a wax stain and let dry.
Step 2: Dab Vaseline randomly around the door, especially in the spots where you just stained the wood, but also on any of the base coat you want to show through (note: anywhere you place the Vaseline, the next layer of paint won’t stick)
Step 3: Do a rough paint job covering the entire door. Paint right over the Vaseline. It doesn’t need to be neat, just slop it on and let dry.
Step 4: Take a paper towel or rag and buff the dry paint in small circles. Where ever the Vaseline was applied the paint will peal up.
Step 5: Dab another layer of Vaseline over the exposed wood and randomly about the door where you want to preserve the fresh paint color.
Step 6: Paint with a final coat of paint. Again, this doesn’t need to be pretty. Just slap the paint on and let dry.
Step 7: Buff the paint with the rag again to remove the excess paint and expose the layers beneath.
Sorry, I don’t have any photos of the process, I hadn’t started documenting my projects back then.
For the backside, I simply applied 3 layers of the Briwax stain (I didn’t even sand it first). It gives it a great warm finish with a lot of depth. It was suggested on a furniture finishing website as giving a Pottery Barn wood finish look. It was kind of hard to find around here, but a hobby shop sold it not too far from here. I expected it to be hard wax, but it was very runny like a liquid stain (until I left it out in the cold garage, but no worries, it turned liquid again once it was warmed up a bit).
I love the way both sides turned out. I turn it around depending on the color of the wall that it is against at the time. So basically it’s reversible, and I love that.
Now for the Antiqued Mirror
I was lucky enough to have access to some fabulous glass. It is a new sheet of glass that has been made by hand to look old by having waves built into it. I cut it to fit inside the door opening and purchased Mirror Looking Glass Spray by Krylon. I purchased it at Walmart because it was convenient, but it is available (and cheaper if you use a coupon) at Michael’s.
Step 1: Clean the glass (after working in a stained glass shop for a few years, I can not live without Sprayaway Glass Cleaner)
Step 2: Make sure the glass is dry
Step 3: Shake the Mirror Spray for 2 min and get a spray bottle full of water ready
Step 4: spray the glass in 5 even coats, waiting 1 min. between layers and allow to partially dry (5-10 min.)
Step 5: Spray the surface with water (the more you spray, the more distressed it will be), and let sit for 5 min.
Step 6: Check the surface and notice all of the paint bubbling up where water has seeped through the paint to the glass surface
Step 7: Gently dab each of the bubbles to pop and absorb the water. Keep rotating the towel so that it stays dry
Step 8: Optional; I thought I had a very solid mirror finish going, once I lifted it up, I could see that it wasn’t as opaque as I thought. That is when I added a piece of printed paper under the glass, this showed me how opaque it really was or was not
Step 9: Spray another 2 or three coats of Mirror spray over the distressing so that those spots are not clear, but darker and distressed
This is a reflection of my hand over the mirror at different levels:
All it takes is water applied while the paint is wet in order to get a mildly antiqued mirror look. While I have yet to try it, I have read that a mix of 50% water and 50% vinegar will age the surface if you want a more distressed look after the paint has dried.
Here is the finished product! The mirror is most reflective on the brown side of the door, but since I was looking for something to reflect light, not an exact image, either side works for me.
In this shot, you can see how wavy the glass is adding to the vintage look. Oh, and that’s me!
The wood side of the door turned out beautiful. It reminds my husband of an old school door.
The mirror is still not opaque. Here in the family room with my garden lights up you can see their glow through the mirror.
Here it is propped up in place of my Laundry room door. It will take a lot of convincing to get my husband to install it there, but doesn’t it look amazing? It lets a lot of light through during the day, but as the light recedes, it becomes more reflective.
shabby bad for a Dumped & Found! Thanks again, Heather and Dan.
UPDATE: I know I just wrote this post, but…I used Sprayaway on the spray-painted side to “clean” it up a bit. It distressed it a little bit more. Perfect actually. It just removed a small amount of the mirror spray where I had already encouraged it to bubble with the water. So…no need for the vinegar and water, just clean the sprayed side.